Komatsu — ROAD LINERS

. OPERATION MACHINE OPERATIONS AND CONTROLS Using Road Liners 3 - 173 Prohibited Works . Do not carry out the following types of work Carrying out operationsand steering on cr ushed rock, extremely rough hard rock, steel beams, scra p iron, or near the edges of steel plates will cause dama ge to the rubber shoes and road liners. e are large numbers of large and small boulders, the stones may get In places such as river beds where ther caught and damage the rubber shoes and out when the shoes are slipping, this will road liners or make the shoes come off. If dozing operatio ns are ca rried reduce the life of the rubber shoes and road liner.

Be careful not to get oil, fuel, or chemical solvent on the rubber shoes and road liners. If such a su bstance s hold get on the shoes, remove it immediately. Furthermore, do not travel on road surfaces where oil h as collect ed. When putting the machine into long-ter m storage (3 months or more), store the machine indoors where it is protected from direct sunlight or rain. Do not use the machine in high-temperat ure areas, such as areas where there is burning wood, st eel plates that have been left under the hot sun, or plac es where asphalt has been laid.

When the rubber parts of the road liner ar e so worn or broken that the head of the mounting bolts are scratched, replace the shoe immediately. If the bolt heads are broken, the bolt cannot be removed. When installing road liners, always instal l them to all links on both sides. If they are installed to o nly one p art of the links, their durability will be greatly re duced. Long Life Operations ying out work. on concrete surfaces. There is danger that the concrete surface will Be careful of the following points when carr Avoid carrying out counterrotation turns scrape off the rubber from the shoe. Avoid making sudden changes in directio n.

This may cause premature wear or damage to the rub ber shoes and road liners. Avoid operating the steering when traveli ng over places where there is a big difference in height. W hen traveling over obstacles or places where there is a to prevent the shoes from coming off. difference in height, drive the machine at right angles t o the obstacle bucket, lower it slowly. oduce oil when crushed (soy beans, corn, or remains of vegetables fter use. the adhesion of the steel core, such as salt, ammonium sulphate, or calcium superphosphate; or wash the machine after use. by salt, so avoid using the machine in coastal areas.

If the machine has been raised using the Avoid doing work with materials that pr squeezed for oil); or wash the machine a Avoid handling materials that will attack potassium chloride, potassium sulphate, or calcium superphosphate; or wash the machine after u The adhesion of the core will be attacked by salt, so avoid using the machine in coastal areas. When handling salt, sugar, wheat, or soy beans, if there is any deep cut in the rubber shoes and roa d liners, t hese substances may get into the lugs or cut p ortion of the rubber. Always repair the rubber before us Do not carry out work that involves scrap Road liners slip extremely easily on sno slopes.

The properties of road liners change wh rubber shoes and road liners. Because of the properties of rubber, use the road liners within a range of -25°C to +65°C (-13°F t o +149°F When carrying out bucket operations, be careful not to damage the road liners with the bucket.