. OPERATION TRANSPORTATION Unloading bending. 6. Turn the travel speed selector switch to low speed travel (Lo lamp lights up). Press travel speed selector switch (5) to switch the travel speed. The travel speed (Lo, Hi) is displayed on the travel speed monitor (6). 3 - 182 1. Load and unload on firm leve l ground only. Maintain a safe distance from the edge of 2. Apply the trailer brakes secur ely, then put blocks (1) under the tires to prevent the trailer fro Set left and right ramps nd right of center (3) of the trailer. n (4) a maximum of 15°. If the ount under the weight of the r the ramps to prevent them from 3. Remove the chains and wire 4. Start the engine. Warm the engine up fully.
5. Set the lock lever to FREE p 7. Turn auto-deceleration switc h (7) OFF and operate the fuel control dial to set the engine Each time auto-decelera switches OFF J ON J O When auto-deceleration auto-deceleration monitor control dial to set the engine Each time auto-decelera speed to low idling. tion switch (7) is pressed, it FF in turn. switch (7) is turned OFF, the (8) goes out.