. OPERATION TROUBLES AND ACTIONS Connecting and Disconnecting Booster Cables WARNING When connecting the cables, never contact the positive (+) and negative (-) terminals. When starting the engine with a booster cable, always wear safety structure frame), a spark will be as far away from the battery as exercise good care so that the each other, or they contact the 3 - 197 Starting Engine with Booster C When starting the engine with a boo glasses. Be careful not to let the normal machi each other. This prevents sparks from could ignite the hydrogen gas given o explodes, it could cause serious injur Be c areful not to make a mistake whe the l possible.
(Avoid the work equipment, conductor) When removing the booster cable, Whe booster cable clips may not contact chassis. NOTICE starting system for this machine uses 24V. For the normal machine, also use a 24V battery. size of the booster cable and clip should be suitable for the battry size. The starting system for this machine uses 24V. For the normal machine, also use a The size of the booster cable and clip should be suitable for the battry size. The battery of the normal machine mu st be the same capacity as that of the engine to be started. Chec k the cables and clips for damag e or corrosion. e firmly connected. g brake levers of both machine are in the LOCK position. AL position.
Make sure that the cables and clips ar Chec k that the lock levers and parkin g brake levers of both machine are in th Chec k that each lever is in the NEUTR