Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE BUCKET TEETH (HORIZONTAL PIN TYPE) WARNING 4 - 35 Replace the bucket teet h before the adapter s It is danger ous if the wor k equipment moves by mistake when the t eeth are Set the wo rk equipment in a stable condition, th en stop the engine and set t he lock lever securely to the LOCK positio The pins c an be knocked out only with strong fo rce, so there is a hazard that the pin may fly out. C heck that there is no one in the surrou nding area. There is a h azard that fra gments will fly during th e replacement work , so always wear protective eq uipment like safety gl asses and gloves 1.

To make it possible t o knock out pin (1) o f tooth (2), put block (5) unde r the bottom of the bucket, and se t so that the bottom surface of the bucke t is horizontal. 2. Check th at the work e quipment is in a stabl e condition, then set the lock lever to the LOCK 3. Place a bar on the he ad of pin (1), hit the b ar with a hamme r to knock o ut the pin, th REMARK If the buc ket teeth cannot be safely removed by this mothod, I have you r Komatsu d istributor replace the bucket teeth.