Komatsu — EVERY 500 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING engine is stopped and may cause serious burns. Wait for the oil 4. Open the pump room on the right side of the machine, then using the filter wrench, turn filter cartridge (1) to the left to remove it. 4 - 56 Parts and oil are at high temperature immedia tely after t temperature to go do wn before performing this operation. Oil pan refill am ount: 11 liters (2.91 US Prepare a filter wrench 1. Remove under cover at the bottom of th e machin e, then s et the container unde to catch the oi r drain valve (P) on the left side o f the ma chine l. 2.

Loosen drain p lug (P) and drain the oil. Be carefu l not to get oil on yourself. plug (P). 3. Tighten drain 5. Clean the filter holder, fill the new filter cartridge with cle an oil, coat the thread and pac king portion of the new with oil (or coat thinly wi th grease ), then i REMARK Check that there is no old packing stuck to the filter h older. If there is an y old packing stuck to the filter, it will cause leakage of oil. 6. When installin g, tighten until the packi ng surface contac ts the filter holder, then tighten 7. After replacing the filter cartridge, add oil throu gh oil fill er (F) until the oil lev (G). 8.

Run the engin el is between the H and L marks o n the di pstick e at idle for a short time, then stop the engine, and check that the oil level is between the H and L marks on the dipstick. For details, see "Check Oil Level in Engine Oil Pan, Add Oil (PAGE 3-115)".