Komatsu — EVERY 4000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHECK FOR LOOSENESS OF HIGH-PRESSURE PIPING CLAMP, HARDENING OF RUBBER CHECK FOR MISSING FUEL SPRAY PREVENTION CAP, HARDENING OF RUBBER 4 - 76 Check visuall y and touch by h and to check that there is no hardening of the rubber an d no loos e bolts of the mounting clamps (2 place s) for t he hig h-pressurepiping betwe en the supply pump and the c ommon rail. If the re are any problems , the parts must be replaced. In this case, please ask your Komatsu distributor to carry out the distributor replacement.

The fuel s pray prevention caps (10 pla ces) on the fuel injection piping and both ends of the high-pressure pipi ng act to prevent the fuel f rom co ming into co ntact with high-tempera ture parts of the engine and causing a fire if th e fuel should lea k or spra y out. Chec k visua lly and touch by hand to check that there are no missing caps, loose b olts or hardening of t he ru bber. If there are s must be replaced. In this case, please ask your Komatsu distributo r to car ry out