Komatsu — HYDRAULIC CIRCUIT

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT HYDRAULIC CIRCUIT One Line Attachment (A) Plug procedure for the 5 minutes before starting 6 - 9 Hydraulic Circuit Con When c onnecting the atta chment, connect the hy draulic circuit as 1. Che ck that the stop va lve is at the LOCK positi on, then remove the plug. Be c areful not to lose or damage any part tha t is removed. 2. Connect the piping attachment maker. for the attachment provided by the he The dimensions on th e stopper valve side ar e as indicated at right . For those on t he attachment side, c each manufacturer of attac 3.

Afte 1) 2) Afte 1) r connecting the p Start the engine, r iping, bleed the air from eferring to "STARTING the circuit. ENGINE (PAGE 3-128)", and run it at low idle for the subsequent 10 the attachment 10 minutes. Then pro ceed to the next work. 2) Run the engine a t low idle until the air in circuit is complete ly removed, then operat e the attachment pedal repeatedly (approx. 10 times) to ble ed the air. NOTICE tachment maker specifies an air bleeding I f th e at attachme nt itself, follow the specified procedure to blee 3) operations. This w ill release the bubbles i n the oil insid e th 4) Check that there i s no oil leakage, and wi pe off any oil tha t has been spilled.