. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT If there is no breaker or installed, operating the pedal may cause overheating and other problems. SPECIFICATIONS Lock Pin position Oil flow (liter/min) (1) Pedal lock -- (2) Full stroke 225 Low pressure safety valve Cranking pressure When using breaker: 17.17 MPa (175 kg/cm 2 , 2490.0 PSI) When using other attachment: 24.53 MPa (250 kg/cm 2 , 3550.0 PSI) 6 - 18 LONG TERM STORAGE If t he e quipmen t is not to be used for a long time, do as follows. Set the stop valve in the LOCK condition Install a plug to the v alve Install a plug to the s topvalve Set the selector valv e to the position for general attachments such as the crusher.
Set the lock pin at th e LOCK position eneral attachment Hydraulic specification Oil f low