DRIVING - Driver Assistance including ignoring further input from the accelerator pedal, but will only use engine braking if available and enabled. VRSL replaces the Cruise Control indicator when active and will show the VRSL limit to the right of the indicator. This limit is shown in gray but turns white when actively limiting vehicle speed. MX engines, additionally, show "LIMITED" on the speedometer. When active, the VRSL speed limit can be changed using the LIM+ and LIM- buttons in the right, steering wheel switch pod. See How to Set the Variable Road Speed Limiter. Enabling VRSL will disable Cruise Control. VRSL can be canceled by A long press of the Cruise Control ON/OFF .
Stopping then parking the vehicle. Activating the PTO (option) (MX engine only). 1. Press the Cruise Control ON/OFF button in the left, steering wheel switch pod. ces while using this Driver Assistance feature. Ultimate responsibility for safe operation of the vehicle remains with the driver at all times. Failure to do so may result in death, personal injury, or property damage. Indicates that the VRSL feature is awaiting input. 2. Press, or press and hold, LIM+ or LIM- to incrementally, or continuously, raise or lower the VRSL limit. The green VRSL indicator will replace the Cruise Control indicator, indicating that VRSL is enabled.
VRSL (like Cruise Control) will use the current vehicle speed as the VRSL limit until changed. Pressing either LIM+ or LIM- will adjust the VRSL limit while this feature is active. WARNING The driver must remain visually aware of the roadway and traffic and not rely solely on Drivers Assistance features to identify and respond to the variety of vehicles or objects sharing the road. The driver must read the ADAS opera- tor’s manual associated with this fea- ture and understand its limitations prior to driving the vehicle. Failure to do so may result in death, personal injury, or property damage.
4 How to Set the Variable Road Speed Limiter The Variable Road Speed Limiter (VRSL) cannot establish a limit while the parking brake is set or the PTO is in operation. The minimum VRSL setting is 25 mph (40 kph). Enabling VRSL will disable Cruise Control if Cruise Control is active. Adaptive Cruise Control (Option) WARNING The driver must remain alert, react ap- propriately, and use safe driving practi- Y53-6110-1A1 (01/21) 145