DRIVING - Driver Assistance Windshield damage directly in front of the camera. This should be fixed as soon as possible. Items on the windshield like stickers, paint, window tint, etc. These should not be placed in front of the camera. Items on the exterior of the truck such as aftermarket visors, wind deflectors, hood ornaments, car racks, crane booms / hooks / buckets, snowplows, mirrors, etc. The Driver Assistance area of the Digital Display indicates if the LDW system recognizes lane markings as follows: White lines indicate detected lanes. Gray lines indicate where the road is monitored for lane markings, but none are detected. Black lines mean that the LDW feature is disabled.
A yellow line indicates an active lane departure event. A lane departure event occurs when the vehicle tire crosses a lane marking without WARNING Driver Assistance features respond dif- ferently to specific road, weather, and traffic conditions. The operator must read the ADAS operator’s manual as- sociated with this feature and under- stand how it responds to these specific conditions prior to driving the vehicle. Failure to do so may result in death, personal injury, or property damage.
4 Using a windshield-mounted, forward facing camera, the Lane Departure Warning (LDW) feature monitors the road for lane markings and alerts the driver when the vehicle departs its lane without the use of the turn signal. Lane departure warning is only active at speeds greater than 37 MPH (60 km/h). LDW is not available when the system cannot accurately detect lane markings; therefore, the camera should be clear of potential obstructions for the LDW feature to operate properly. The following lists some conditions that can limit the performance of the features that use the camera: Buildup of dirt, mud, water, snow, ice, bugs, etc. on the windshield.
These should be able to be resolved with proper use of the windshield washer/wiper system as the camera is intentionally installed in the wiper path. Y53-6110-1A1 (01/21) 151