DRIVING - Transmission highway departure prior to the braking action taken during a HDB event (see Lane Departure Warning). The operator can acknowledge and cancel a Highway Departure Braking (HDB) event by Applying the service brake and braking more than that applied by HDB. Pressing the accelerator pedal and pressing more than 90% of the pedal range. Activating the turn signal. Activating the hazards. Steering the vehicle back into the lane. signs. The detected, posted speed limit is presented on the display using a road sign located in the Driver Assistance area (see Minimized View with Driver Assistance):
Release Bearing Wear When you must idle your engine for any period of time, shift your transmission to neutral and disengage the clutch (take your foot OFF of the pedal). This helps prevent unnecessary wear to your clutch release bearing, and is less tiring for you, too. When vehicle speed exceeds the posted speed limit by 5 mph (8 kph) or more, the operator is notified using alternating red and blue “cop” lights, indicating above the sign on the display. This is accompanied by an audible alert. Please read the ADAS OEM operator’s manual specific for your vehicle for more information about Speed Limit Recognition. More Tips Always use the clutch when making upshifts or downshifts.
Always select a starting gear that will provide sufficient gear reduction for the load and terrain. Never downshift when the vehicle is moving too fast. Never slam or jerk the shift lever to complete gear engagement. Never coast with the transmission in neutral and the clutch disengaged. To provide smooth gear engagements while shifting, use proper coordination between shift lever and clutch. Double clutching is a very effective means to increase the service life of your transmission. Double clutching refers to a technique where the clutch pedal is used twice per shift instead of once.
It 4 To prevent abuse of this feature, after six Highway Departure Braking events, HDB will be disabled until the next time the ignition switch is cycled. This is to prevent using HDB irresponsibly or in a manner for which it was not intended. Please read the ADAS OEM operator’s manual specific for your vehicle for more information about Highway Departure Braking. Transmission Transmission Tips Riding the Clutch The clutch is not a footrest. DO NOT drive with your foot resting on the clutch pedal. It will allow your clutch to slip, causing excessive heat and wear, damage could result.
Speed Limit Recognition Using the forward camera of your Driver Assistance instrumentation, your vehicle can read most North American speed limit Y53-6110-1A1 (01/21) 153