PACCAR 579 — Yaw Control

DRIVING - Brakes A Real World Example of How the System Operates Excessive speed for road conditions creates forces that exceed the threshold at which a vehicle is likely to roll over on a higher-friction surface. The system automatically reduces engine torque and applies the service brakes (based on the projected rollover risk) to reduce the vehicle speed, thereby reducing the tendency to roll over. During operation, if the friction between the road surface and the tires is not sufficient to oppose lateral (side) forces, one or more of the tires can slide, causing the truck/ tractor to spin.

These yaw events are referred to as either "under-steer" (where there is a lack of vehicle response to steering input due to tire slide on the steer axle) or "over-steer" (where the tractor's rear end slides out due to tire slide on the rear axle) situation. Generally, shorter wheelbase vehicles (tractors, for instance) have less natural yaw stability, while longer wheelbase vehicles (straight trucks, for instance) have greater natural yaw stability. Factors that influence yaw stability are: wheelbase, suspension, steering geometry, weight distribution front to rear, and vehicle track width. 4 Electronic Stability Control may reduce the vehicle speed automatically.

To minimize unexpected deceleration and reduce the risk of a collision the operator must: Avoid aggressive driving maneuvers, such as sharp turns or abrupt lane changes at high speeds, which might trigger the stability system. Always operate the vehicle safely, drive defensively, anticipate obstacles and pay attention to road, weather, and traffic conditions. ABS, ATC, and ESC stability systems are no substitute for prudent, careful driving. Roll Stability Example Yaw Control Yaw Control responds to a wide range of low- to high-friction surface scenarios including rollover, jackknife and loss of control.

In the case of vehicle slide (over- steer or understeer situations), the system will reduce the throttle and then brake one or more of the "four corners" of the vehicle (in addition to potentially applying the trailer brakes), thus applying a counter- force to better align the vehicle with an Roll Stability Yaw Stability Yaw stability counteracts the tendency of a vehicle to spin about its vertical axis. 164 Y53-6110-1A1 (01/21)