PACCAR 579 — Auxiliary Axle Pressure Regulator

DRIVING - Axle and Suspension 3. To make the axle downshift, release and depress the accelerator quickly to increase the engine rpm. The axle will shift to LOW range. 4. You are now in the LOW axle range for rough terrain and heavy loads. Shift the transmission normally to maintain the desired speed. calibration of its controls. Operating the auxiliary axles will also require a firm understanding of the Gross Axle Weight Rating (GAWR) and the load that is being carried. The vehicle will have switches on the dash to control the position of the auxiliary axles. In certain situations, however, the system will override the controls to protect the axle system.

For Self Steering Lift Axles, the axle will raise when the park brakes are applied or if the vehicle is placed in reverse. For Non-Steer Lift Axles, the axle will only automatically raise if the park brakes are applied and there are no park brakes on the lift axle. Non-Steer Lift Axles do not automatically raise when the vehicle is placed in reverse. Operating the auxiliary liftable axles must be performed in a manner that does not exceed the axle creep rating. Axle creep ratings are weight and speed limits that are allowed while the vehicle is fully loaded (in excess of the vehicle’s standard GAWR) and the axle is in its up position.

Axle creep ratings are assigned by the axle manufacturer and are based on axle model and intended service of the vehicle. Contact an authorized dealership if you are unable to identify the axle creep rating of this vehicle. Liftable/steerable (axle lift calibration required) Liftable/non-steerable (axle lift calibration required) Non-liftable (some suspensions require dump valve calibration) WARNING Auxiliary Axle DO NOT operate or park the vehicle with auxiliary axles in the down/loaded position when vehicle is unladen, or is being unloaded. Raise or dump air into driver controlled auxiliary axle(s) prior to unloading vehicle.

Failure to do so can result in loss of vehicle control or roll-away that may result in personal injury, property damage or death. 4 Adjustable auxiliary axles (commonly known as Pusher or Tag axles) can add to the productivity of the vehicle by increasing the load capabilities of the vehicle when they are in the deployed (down) position. There are different configurations of axles with different functionality (liftable versus steerable). Without the extra axle, the excessive weight can reduce the service life of vehicle components such as, but not limited to, the frame rail, axles, suspension and brakes.

Operation of the auxiliary axles includes the proper maintenance of the system and Auxiliary Axle Pressure Regulator Vehicles with liftable auxiliary axles will have knobs available to adjust the pressure in the auxiliary axle suspension. These knobs are in addition to the tag and pusher axle switches that control the axle position. Adding more pressure to the auxiliary axle will increase the pressure the auxiliary axle pushes down. Increasing pressure will Y53-6110-1A1 (01/21) 173