PACCAR 579 — Recovery Hitch

EMERGENCY - How to Recover a Vehicle torque the release stud assembly. (S-Cam-type maximum: 50 lb-ft (68 N·m), Wedge-type maximum: 30 lb-ft (41 N·m)). The spring brake is now mechanically released. designed to be used as towing devices for long distance. Specially designed hitches are required to recover your vehicle. The recovery hitches attach to the frame. Two hitch assemblies, made up of the following parts, are recommended for the proper recovery of your vehicle: 2 5. Assemble the release stud washer and nut on the release stud. Recovery Hitch A removable recovery hitch is a device that attaches to the sockets in the front bumper in the event that the vehicle needs to be recovered.

These hitches are designed for short distance and intermittent duty to help pull a vehicle. These hitches are not If your vehicle is not equipped with the proper recovery hitch assembly, contact an authorized dealer to obtain the proper equipment. 6. With a wrench, turn the release stud assembly nut until the compression spring is 90-95 percent caged. While doing this, check to make sure the push rod (adapter push rod or service push rod) is retracting. DO NOT over- Y53-6110-1A1 (01/21) 51