1. Remove the blind plugs from portion (a) of the boom piping and portion (b) of the arm cylinder piping, then fit new O-rings (X07000-13048 x 2, %07000-13038 x 2) to portion (a), and install hoses (X07097-01414 x 2, X07097-01212 x 2). F Arm bottom 2. Using flanges (% 21N-62-19330 x 2) at portion (b), short circuit the head end and bottom end. (See diagram on right) (Use the removed split flanges, bolts, washers, and O-rings again. Be careful not to let dust get in.) 3. Remove blind plug from boom cylinder hose, then using flanges (21 N-62-19330 x 2), short circuit the head end and bottom end. Use the removed split flanges, botls, and O-rings again. 109