E-22: INSTALLATION OF WORK EQUIPMENT GREASE PIPING 1. cylinder foot portion @ . Install 2 grease fittings (%07020-00000) to boom 2. the hose elbow end of the boom cylinder top Remove the blind plug from the cylinder end and greasing hose at portion @, then remove the elbows (205-70-51380 x 2) from the hose, assemble to the cylinder end, then connect. 3. Remove the blind plug from the cylinder end and the hose elbow end of the arm cylinder top greasing hose at portion@, then remove the elbows (205- 70-65780 x 2) from the hose, assemble to the cyl- inder end, then connect. 4.
Assemble the greasing nipples (~07020-00675 x 6) to the central greasing block at the right side of the boom at portion @ . 5. the hose nipple end of the arm cylinder top greasing Remove the blind plug from the cylinder end and hose at portion@, then remove the elbows (205 70-51390 x 2) from the hose, assemble to the cyl- inder end, then connect. 6. Assemble the elbows (%209-72-16140 x 2) to the central greasing block at the boom-arm connecting boss at portion 0. 7. Assemble the greasing nipples (X07020-00000 x 4) to the arm central greasing block at portion @ . 8. Assemble the greasing nipples (%07020-00900 x 2) to the link connecting boss at the arm top end at portion @ . 9.
Assemble the greasing nipples (%07020-00000 x 2) to the front link boss at portion@. 10. Assemble the greasing nipples (%07020-00900 x 4) to the front link boss at portion@. 11. to the bucket hinge pin at portion 0. Assemble the greasing nipples (~07020-00000 x 2) 12. Assemble the greasing nipples (X 07020-00000 x 2) to the bottom dump cylinder bottom boss at oor- tion 0. 130