Komatsu — E-29: ADJUSTMENT OF WORK EQUIPMENT CONTROLLER (FOR AUTOMATIC CONTROL OF LOADING SHOVEL)

4) If there is shock when stopping BOOM LOWER at the end of the stroke in horizontal digging control; the end of the stroke in horizontal digging If it is desired to adjust upward direction before control, Turn adjustment trimmer VR3 to give the suitable path. Trimmer VR3 can be used to change width W in the diagram above. How erences of the user. ever, the setting can be made to suit the pref- The relationship between trimmer VR3 and width W in the diagram above is as shown below. COUNTERCLOCKWISE. If width W is too LARGE, turn trimmer VR3 before the end of the stroke is excessive.) (Make this adjustment if the upward movement If width W is too SMALL, turn trimmer VR3 CLOCKWISE.

(Make this adjustment if the bucket suddenly drops at the end of the stroke.) 5) When the amount of compensation (angle) of the bucket angle compensation (option) is too large or too small : Example: When the amount of compensation is too small able amount of adjustment. However, the Turn adjustment trimmer VR2 to give a suit- setting can be made slightly larger or slightly smaller to meet the preferences of the user. The relationship between trimmer VR2 and the amount of compensation is as shown below. If the amount of compensation is too LARGE, turn trimmer VR2 CLOCKWISE. If the amount of compensation is too SMALL, turn trimmer VR2 COUNTERCLOCKWISE.

Carry out this adjustment at the BOOM RAISE speed most commonly used in actual opera- tions. Carry out the adjustment with the bucket loaded. 146