C-14:CHECK OF OIL AND WATER LEVELS Check all oil and water levels according to process No. 8-4 (See page 39). C-l 5: CHECK CENTRAL MONITOR (carry out only when machine is divided into three parts for transportation) 40). Carry out checks according to process No. B-5 (See page Next, carry out follows. (I) Start the engine and run at low idling for at least ten * When doing this, do not operate the control minutes. * Lower the hydraulic safety lock to the LOCK levers in the operator’s compartment. (2) Clean the machine to make it easier to locate any position. problem points.
and oil level gauges clean and to prevent the entry Be particularly careful to keep the greasing points of dirt or dust. 64