Komatsu — C-17: BLEEDING AIR FROM HYDRAULIC IDLER CUSHION CIRCUIT

C-l 7: E:R’Ev9:“” AIR FROM HYDRAULIC IDLER CUSHION * When opening and closing stop valve @ and drain * valve @ , use the special handle. If drain valve @ is suddenly loosened, high pressure * forms in the tank circuit, so avoid loosening quickly. Do not loosen air bleed plugs @ and @ more than one turn. 1. Open stop valve @ and drain valve @ complete- 2. fY. Loosen air bleed plugs @ (2 places: left and right) loosen plug @ one turn. one turn, then remove plug @ in Section B-B and 3. Start the engine and run at idling for 2 - 3 minutes. 4. to block the track, then operate the right travel Fit a block under the front of the right track shoe times.

lever slowly to the FORWARD position 2 - 3 View from top of machine I Section B - B Detail P View from left side of machine 66