D-l 5: INSTALLATION OF WORK EQUIPMENT WIRING AND WORK EQUIPMENT HOSE CLAMPS Precautions 1) Keep the blind plugs used for transportation in a safe place so that they can be used again. 2) Be careful to install the hoses without twisting or interference. (After completion of assembly, operate the work equipment and check again that there is no twisting or interference of the hoses.) 1. Remove the blind plugs at portions @ and @ from the connector for the working lamp wiring, then connect the connector. Install the working lamp as shown in the figure on After installing, always check that the system the right. works. Parts sent individually No. Part No.
Part Name cty 2 203-06-21290 Plate 1 1 203-06-56140 Work lamp ass’y 1 3 0101 o-51 430 Bolt 1 4 01643-31445 Washer 1 92