POWER TAKE OFF 00-7 ON-VEHICLE SERVICE Inspection and Supply of The Hydraulic Op- erating Fluid Notice: When inspecting and supplying hydraulic operating flu- id, you might have incurred danger. In that case, inspect and supply hydraulic operating fluid after having fully checked safety. Symptoms Due to Insufficient Hydraulic Oper- ating Fluid The following symptoms might have occurred. In that case, inspect and supply hydraulic operating fluid be- cause it may be insufficient. 1. The body (cargo deck) is raised only immediately. 2. The body (cargo deck) is lugged during rise. 3.
While the body (cargo deck) is being raised, the oil pump portion causes a large abnormal sound (such as caterwaul or grate). 4. After the body (cargo deck) has been raised, it drops generating a knock. NPA0015E 3. Firmly actuate the parking brake and apply a scotch to the rear tire. Preparing for Hydraulic Operating Fluid Supply If there is loading, pull down the loading. Then supply hydraulic operating fluid after having safely and more carefully raised the body (cargo deck) and having firmly held the body (cargo deck) by the “safety rod” and the “safety strut” in accordance with the following “How to raise the body (cargo deck)”. How to Raise the Body (Cargo Deck) 1.
Put a truck at a horizontal place. Notice: Never raise the body (cargo deck) on tilted ground, soft ground, and unleveled ground. A truck may be inverted or warp may be generated in functional components. NPA0016E Legend 1. Release button 2. Parking brake lever 4. Start the engine and depress the clutch pedal to the floor. Push in the lock button of the dump lever and release the lock to set the “Up” position. Notice: Fully check that there is no person or hindrance around a truck. When the dump lever is operated, observe the notes of the Note label attached to the driver's seat. NPA0014E 2. Set the shift lever to the “Neutral” position.