Doosan DX140R/DX140LCR — 19. Rotating Buttons

17. Travel/Swing Alarm Switch (Optional) If unit is equipped with a travel/swing alarm buzzer, push this switch to active it, whenever swinging or traveling. O I II O. In this position, the travel/swing alarm system is turned "OFF". I. In this position, the travel alarm will only sound, when the machine is moving. II. In this position, the travel/swing alarm will sound while swinging and traveling, if equipped with a swing alarm device. Figure 27 FG000031 NOTE: If machine is only equipped with a travel alarm device, the alarm will not sound when swinging although the switch is in the "II" position. 18.

Horn Button (Left-hand Work Lever) Press the lower button on the top of the left-hand work lever (joystick) to sound horn. NOTE: The starter switch must be "ON". FG014541 Figure 28 19. Rotating Buttons 2 For a machine equipped with an attachment that rotates, press the upper two buttons on the top of the left-hand work lever (joystick) to rotate the attachment clockwise or counterclockwise. Left button is for counterclockwise and the right one is for clockwise. 1 Figure 29 CAUTION FG014542 AVOID INJURY Before using any attachment in a work application, be sure to check its functional control. Make sure that desired movement or action is being activated by the control. e.g.

opening/closing, CW/CCW, crowd/dump, etc. DX140R/DX140LCR Operating Controls 2-16