Set Password (Lock and Unlock) Use extreme care when setting the password for starting the engine. If a mistake is made when entering the number, and the number is excepted by the system, as being correct, that number will be the only one that will allow the security system to be activated or deactivated. Write your password down and keep it in a safe location. Password numbers can only use numbers between 1 and 0. The small number to the lower left of each button on the instrument panel, indicates the number that will be entered when that button is pressed. E F C H C H 1 2 3 4 5 Figure 91 6 7 8 0 9 FG013662 When the cursor is on "Set Password" press the "SELECT" ( ) button.
The set password submenu will appear. NOTE: The screen can be returned to the main menu by pressing the "ESC"( ) button (3, Figure 71). FG013571 Figure 92 Password inquiry menu will be displayed. NOTE: The initial password is "1111". The password can be changed within ten minutes while the starter switch is in "I" (ON) position. ENTER PASSWORD After changing password, be sure to use the changed password. CAUTION AVOID INJURY FG013717 Failure to enter correct password three times, will return normal display screen, and another attempt will not be possible for ten minutes. Figure 93 Operating Controls 2-41 DX140R/DX140LCR MAIN MENU L 1. Language l 2. Set Clock l 3. Filter / Oil Info 4.
Adjust Display 5. Set Password : UP : DOWN : SELECT