Doosan DX140R/DX140LCR — Opening the Window

FRONT WINDOWS WARNING AVOID DEATH OR SERIOUS INJURY When leaving operator's seat, move safety lever to "LOCK" position (Figure 138), if not a serious accident could occur by accidentally moving work levers. Unlock EX1300566 Figure 138 Lock Front Upper Window The front upper window can be housed in cabin's ceiling. Opening the Window WARNING 2 AVOID DEATH OR SERIOUS INJURY 1 When stowing front window in cabin roof, make sure both release levers (1, Figure 139) are latched. 1. Lower bucket or work tool to ground. 2. Move safety lever (Figure 138) to "LOCK" position. Figure 139 FG014391 3. Set engine speed control dial to "LOW IDLE". Allow engine to idle for three - five minutes. 4.

Stop engine by turning key to "O" (OFF) position. 5. Hold window handles (1, Figure 139), then pull lock levers (2) to release lock. The top of front window will come out. 6. Pull window up, and push it against lock pin at rear of cabin. Make sure that it is securely latched. 7. Check that lock levers are securely latched in lock position. NOTE: When front upper window is open, never extend your head or body through the window frame. NOTE: If window happens to fall with a strong impact against machine, while some part of your body is extended out of cabin, it can result in bodily injury. Operating Controls 2-61 DX140R/DX140LCR