Doosan DX140R/DX140LCR — Engine Start

8. After warming unit, check all operating indicators to make sure that all engine systems (oil pressure, coolant, etc.) are in the normal operating range. If any problems are noticed, stop engine. Normal indicators are: 4 5 6 7 CHECK PWR 1 2 3 FG013731 Figure 6 9. Check color of exhaust smoke. No color or light blue - Engine is running in good condition. Black - Incomplete combustion. Check cause. White or dark blue - Engine is burning engine oil. Check cause. 10. Check for usual engine vibration and noises. If any are heard or felt, investigate cause. NOTE:

If engine coolant temperature gauge pointer moves into the red zone, the engine coolant temperature warning light will turn "ON", a warning buzzer will sound, and the engine speed will be automatically reduced. Allow the engine to run at low idle speed until temperature gauge registers in the blue zone again. When the blue zone is reached, allow the engine to idle for an additional three - five minutes before shutting down the engine. If not allowed to idle, heat surge may develop which will damage the engine. Allowing the engine to idle will dissipate heat. Check the coolant level, look for a loose fan belt, inspect for debris around radiator, and so on. Operation 3-5 DX140R/DX140LCR No.

Instrument Panel Light or Gauge Indicator Reading 1 Engine Coolant Temperature Gauge Blue Range 2 Fuel Gauge Blue Range 3 Hydraulic Oil Temperature Gauge Blue Range 4 Charging Warning Light OFF 5 Engine Oil Pressure Warning Light OFF 6 Engine Coolant Temperature Warning Light OFF 7 Engine Check Warning Light OFF