Doosan DX140R/DX140LCR — Left-hand Work Lever (Joystick) (Figure 44 and Figure 45)

Work Levers (Joysticks) (ISO Pattern) 1 5 WARNING 3 4 7 8 6 2 9 AVOID DEATH OR SERIOUS INJURY Check surrounding area before swinging. When operating a lever while in auto idle, do it carefully, because the engine speed will increase rapidly. 10 NOTE: When starting work, move work levers (joysticks) slowly and check movement of swing and front attachment. FG014413 Figure 44 This equipment is manufactured using the lever configuration described in ISO standards. Do not change valving, hoses, etc., that would change this standard. The boom, arm and bucket movements and swing direction of work levers (joysticks) are as follows: Left-hand Work Lever (Joystick) (Figure 44 and Figure 45) 1.

Arm dump 4 2. Arm crowd 1 3. Left swing 2 3 4. Right swing NOTE: The swing brake is spring applied and hydraulically released. It is always engaged when the work lever (joystick) is in "NEUTRAL" or the engine is stopped. Figure 45 FG000119 NOTE: The following is not a mechanical malfunction but a proper phenomenon of the excavator. When operating the arm, it may stop momentarily. When the arm is operated, the weight of the arm can cause it to move faster than the amount of oil being supplied. FG000120 Figure 46 DX140R/DX140LCR Operation 3-22