Rotating Pedal Valve (Optional) Attachment Rotating by Using the Pedal Valve 1 1. Pressing end (1, Figure 90) is used to turn clockwise. 2. Pressing end (2, Figure 90) is used to turn counterclockwise. NOTE: Before activating the pedal, be sure to check the function of the attachment. 2 Figure 90 FG000405 Locking the Pedal When rotating is not needed, the pedal can be locked by using the prop rod (3) locking device. Locking is completed when the top end of the prop (3) is positioned into pedal hole. 3 FG000406 Figure 91 A. Location for "UNLOCKING". B, Location for "LOCKING".
A B Figure 92 FG000407 Attachment Rotation Using the Left-hand Work Lever (Joystick) 2 For a machine equipped with an attachment that rotates, rotation is activated while one of the control buttons is being pressed on top of the left-hand work lever (joystick). 1 There are three buttons on top of the left-hand work lever. The left and right ones are for controlling rotation. NOTE: The middle button is for the horn. Left button is for counterclockwise rotation, and the right one is for clockwise rotation. FG014542 Figure 93 Left-hand Work Lever (Joystick) DX140R/DX140LCR Operation 3-40