Long Life Operation Be careful of the following points when carrying out work 1. Avoid carrying out counter rotation turns on concretes surfaces. There is danger that concrete surface will scrape off the rubber from the shoe. 2. Avoid making sudden changes in direction. This can cause premature wear or damage to the rubber shoes and road liners. 3. Avoid operating the steering when traveling over places where there is a big difference in height, drive the machine at right angles to the obstacle to prevent the shoes from coming off. 4. If the machine has been raised using the bucket. Lower it slowly. 5.
Avoid doing work with materials that produce oil when crushed(soy beans, corn, or remains of vegetables squeezed for oil); or wash the machine after use. 6. Avoid handling materials that will attack the adhesion of the steel core, such as salt, ammonium sulphate, potassium chloride, potassium sulphate, or calcium superphosphate; or wash the machine after use. 7. The adhesion of the core will be attacked by salt, so avoid using the machine in coastal areas. 8. When handling salt, sugar, wheat, or soy bean, if there is any deep cut in the rubber shoes and road liners, these substances may get into the lugs or cut portion of the rubber. Always repair the rubber before use. 9.
Do not carry out work that involves scraping against walls or concrete embankments. 10. Road liners slip extremely easily on snow or frozen roads. Be careful not to slip when traveling or working on slopes. 11. The properties of road liners change when working in extremely cold places, and this will reduce the life of the rubber shoes and road liners. 12. Because of the properties of rubber, use the road liners within a range of -25°C (-77°F) to +65°C (-149°F). 13. When carrying out bucket operations, be careful not to damage the road liners with the bucket. Operation 3-49 DX140R/DX140LCR