PRELIMINARY WORK MACHINE SETUP FOR MAINTENANCE When performing maintenance specified in this manual, always park the excavator as follows. NOTE: Certain types of maintenance may require the machine to be positioned differently. Always return machine to this position. 1. Park on firm and level ground. 2. Lower bucket or work tool to ground. FG000111 Figure 7 3. Move safety lever to "LOCK" position. Unlock EX1300566 Figure 8 Lock 4. Allow engine to run at low idle for a minimum of five minutes to allow engine to cool. If this is not done, heat surge can occur. HAOB290L Figure 9 DX140R/DX140LCR Inspection, Maintenance and Adjustment 4-4