Check Engine Fan Belt Tension Idle Pulley IMPORTANT Alternator Compressor A loose fan belt can cause engine overheating, poor charging, and/or premature belt wear. A belt that is too tight can cause damage to the water pump, alternator bearing or belt. 1. Inspect every 250 hours. (Inspect after first 50 hours of operation.) 2. With the engine shut off, check the tension of the fan belt by pressing downwards on the belt, midway between the fan pulley and alternator pulley. The belt should flex approximately 10 mm (0.4 in). See Figure 49. To adjust the belt, loosen the alternator adjustment plate bolts, adjust the belt tension and retighten the bolts.
Crankshaft FG015021 Figure 49 Inspection, Maintenance and Adjustment 4-33 DX140R/DX140LCR