Doosan DX140R/DX140LCR — Guidelines

When swinging or backing up, press button to change display mode on monitor so you can check rear and side of machine. Before moving the machine, look around the work site through mirrors and monitor to confirm that no one is around the machine. While operating or traveling in places with poor visibility, and if it is impossible to confirm the condition of the work site, or if an obstacle is in the area around the machine, there can be a danger that the machine may suffer damage or operator or others may suffer serious personal injury. Inspect equipment and immediately report if there are problems with the visual aids. If machine cannot be fixed immediately, DO NOT use the machine.

Contact your local DOOSAN distributor as soon as possible and ask for repairs. Guidelines If the visibility cannot be sufficiently assured, use a flagman. The operator should pay careful attention to the signals and follow the instructions of the flagman. Signals should only be given by one flagman. When working in dark places, turn "ON" work lights and front lights on the machine. Set up additional lighting in the area. Stop operations if there is poor visibility, such as fog, snow, rain, or sandstorms. Check mirrors and rear view camera (optional) lens on machine before starting operations. Clean off any dirt and adjust view to ensure good visibility.

When operating or traveling during poor visibility conditions, and especially in a large machine, strictly adhere to the above guidelines. NOTE: Refer to ISO 5006 for additional guidelines and information. It may not be possible to adjust all visual aids to see all the way around the machine. Therefore, additional precautions must be taken to ensure the safe operation of the machine. NOTE: Larger machines are more likely to have blind spots. NOTE: Refer to ISO 5006 for weight class information. DX140R/DX140LCR Safety 1-20