Doosan DX140R/DX140LCR — Engine Starting

Engine Starting Walk around your machine before getting in the operator's cabin. Look for evidence of leaking fluid, loose fasteners, misaligned assemblies or any other indications of possible equipment hazard. All equipment covers and machinery safety guards must be in place, to protect against injury while the machine is being operated. Look around the work site area for potential hazards, people or property that could be at risk while operation is in progress. NEVER start the engine if there is any indication that maintenance or service work is in progress, or if a warning tag is attached to controls in the cabin.

A machine that has not been used recently, or is being operated in extremely cold temperatures, could require a warm-up or maintenance service before start-up. Check gauges and monitor displays for normal operation before starting the engine. Listen for unusual noises and remain alert for other potentially hazardous conditions at the start of the work cycle. Do not short-circuit the starting motor to start the engine. This is not only dangerous, but may also damage the machine. When starting the engine, sound the horn as an alert. Start and operate the machine only while seated. Safety 1-33 DX140R/DX140LCR