Doosan DX140R/DX140LCR — Operations on Slopes

Operate Carefully on Snow, Ice and in Very Cold Temperatures In icy cold weather avoid sudden travel movements and stay away from even slight slopes. The machine could skid off to one side very easily. Snow accumulation could hide or obscure potential hazards. Use care while operating or while using the machine to clear snow. Warming up the engine for a short period may be necessary, to avoid operating with sluggish or reduced working capacity. The jolting shocks and impact loads caused by bumping or bottoming the boom or attachment are more likely to cause severe stress in very cold temperatures. Reducing work cycle rate and workload may be necessary.

When the temperature rises, frozen road surfaces become soft, and machine travel becomes unstable. In cold weather, do not touch metal surfaces with your bare hands. If you touch a metal surface in extremely cold weather, your skin may freeze to the metal surface. Operations on Slopes When working on slopes. there is a danger that the machine may lose its balance and turn over, when swinging, or when work equipment is operated. Always carry out these operations carefully. Do not swing the work equipment from the uphill side to the downhill side when the bucket is loaded. This operation is dangerous.

If the machine has to be used on a slope, pile the soil to make a platform that will keep the machine as horizontal as possible. FG000212 Figure 31 In addition, lower the bucket as far as possible, keep it pulled into the front, and keep the swing speed as low as possible. Safety 1-43 DX140R/DX140LCR