Doosan DX140R/DX140LCR — Warning for Counterweight and Front Attachment Removal

Treatment for Electrical Welding to the Body Structure To prevent damage to ECU by electrical welding, please observe the following procedures: 1. Open the door of the battery cover. 2. Detach the cover after loosening the bolts on the battery. 3. Detach the positive and negative terminal cables from the battery. 4. Detach the undercover, and after that detach the connector (1) from the ECU that are installed at the engine. FG000312 Figure 40 5. Proceed with welding. 6. After welding, carefully reassemble the connector. 7. Connect the battery terminal cables. 8. Reassemble the undercover under the engine. 9. Reassemble the cover over the battery. 10. Close the cover of the battery.

Figure 41 Warning for Counterweight and Front Attachment Removal DANGER AVOID DEATH DOOSAN warns any user, that removal of the counterweight from the machine, front attachment or any other part, may affect the stability of the machine. This could cause unexpected movement, resulting in death or serious injuries. DOOSAN is not liable for any misuse. Never remove counterweight or front attachment unless the upper structure is in-line with the lower structure. FG000371 Figure 42 Never rotate the upper structure once the counterweight or front attachment has been removed. Safety 1-49 DX140R/DX140LCR 1 FG000335