Feet Unit: 1,000 Ib 1. Load point is the end of the arm. 2. Capacities marked with an asterisk (*) are limited by hydraulic capacities. 3. Lift capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. 4. The least stable position is over the side. 5. Lift capacities are in compliance with ISO 10567. Safety 1-63 DX140R/DX140LCR A (ft) B (ft) 10 15 20 Max.
Reach Reach 25 4.34 * 4.34 * 13.59 20 6.04 * 6.04 * 3.52 * 3.52 * 19.15 15 6.74 * 6.74 * 5.72 * 4.85 3.31 * 3.31 * 22.24 10 11.15 * 11.15 * 9.06 * 7.69 7.53 * 4.7 3.38 * 3.34 23.90 5 18.13 * 13.5 11.49 * 7.13 7.37 4.47 3.66 * 3.12 24.42 0 19.14 * 12.49 11.35 6.67 7.15 4.26 4.24 * 3.17 23.89 -5 21.32 * 12.25 11.11 6.46 7.04 4.16 5.37 * 3.54 22.22 -10 18.67 * 12.42 11.15 6.5 7.64 4.54 19.09 -15 12.36 * 12.36 * 8.48 * 8.01 13.56