Feet Unit: 1,000 Ib 1. Load point is the end of the arm. 2. Capacities marked with an asterisk (*) are limited by hydraulic capacities. 3. Lift capacities shown do not exceed 75% of minimum tipping loads or 87% of hydraulic capacities. 4. The least stable position is over the side. 5. Lift capacities are in compliance with ISO 10567. Safety 1-77 DX140R/DX140LCR A (ft) B (ft) 10 15 20 Max.
Reach Reach 25 5.77 * 5.77 * 11.72 20 7.13 * 7.13 * 4.28 * 4.28 * 17.88 15 9.42 * 9.42 * 7.89 * 7.66 7.40 * 4.54 3.88 * 3.88 * 21.17 10 9.89 * 7.14 7.32 4.4 3.84 * 3.37 22.90 5 11.25 6.57 7.08 4.18 4.06 * 3.14 23.46 0 10.87 6.23 6.9 4.02 4.59 * 3.22 22.90 -5 19.16 * 11.81 10.8 6.17 6.87 4 5.66 * 3.69 21.15 -10 11.02 6.37 8.54 5.02 17.69