Komatsu — RUBBER SHOES AND ROAD LINERS

OPERATION MACHINE OPERATIONS AND CONTROLS Rubber shoes and road liners slip extremely easily on snow or frozen roads. Be careful not to slip when travel- ing or working on slopes. The properties of rubber shoes and road liners change when working in extermely cold places, and this will reduce the life of the rubber shoes and road liners. Because of the properties of rubber, use the rubber shoes within a range of -25єC - +55єC (-13єF - +131єF). Because of the properties of rubber, use the road liners within a range of -25єC - +65єC (-13єF - +149єF). When carrying out bucket operations, be careful not to damage the rubber shoes and road liners with the bucket.

Always maintain the rubber shoes at the proper tension to prevent them from coming off. If the tension is low, the rubber shoes will come off under the following conditions. 1. Avoid operating the steering when traveling over curbs, rocks, or places where there is a big difference in height (more than approx. 20cm (8 in)). When traveling over such objects, always travel at right angles to the object. 2. When traveling in reverse up a slope, do not turn when moving from flat ground onto the slope. If it is necessary to turn on slopes, be sure to turn gradu- ally. 3.

Avoid traveling along the edge of slopes or on rough groundwith the track on one side raised (with the machine tilting at anangle of more than approx. 10є) and with the track on the other side on flat ground. To avoid damage to the rubber shoes and road liners, travel with the tracks on both sides on flat ground. 3-81