Komatsu — STARTING MACHINE AFTER LONG-TERM STORAGE

OPERATION LONG TERM STORAGE AFTER STORAGE NOTICE If the machine is to be used when the monthly rust prevention operation has not been carried out, please contact your Komatsu distributor. When using the machine after long-term storage, do as follows before using it. Wipe off all the grease coating the hydraulic cylinder rods. Add oil and grease to all places. STARTING MACHINE AFTER LONG-TERM STORAGE When starting the engine after long-term storage, cancel the automatic warming-up operation as follows. 1. Turn the starting switch key to the ON position. 2. Turn the fuel control dial from the low idling position to the FULL position and hold it there for at least 3 sec- onds.

Then return it to the idling position and start the engine. 3-99