Komatsu — PROPER SELECTION

FUEL,COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE MAINTENANCE REMARK When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic maintenance hours described in this manual. Change oil according to the following table if fuel suiphur content is above 0.5%. When starting the engine in an atmosphric temterature of lower than 0 ° C (32 ° F), be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40, even though an atmospheric temparature gose up to 10 ° C (50 ° F) more or less in the day time. Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half.

There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil than matches the temparature in the table. We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydrauric work equipment applications. Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers API:

American Petroleum Insitute 4-10 Engine oil pan Swing machinery case Final drive case (each) PTO gear case Hydraulic system Fuel tank Cooling system Specified capacity liters 11 1.5 1.7 0.35 90 130 10.3 US gal 2.90 0.40 0.45 0.09 23.76 34.32 2.72 UK gal 2.42 0.33 0.37 0.08 19.80 28.60 2.27 Refill capacity liters 10.5 1.5 1.7 0.35 57 — — US gal 2.77 0.40 0.45 0.09 15.05 — — UK gal 2.31 0.33 0.37 0.08 12.54 — — Fuel suiphur content Charge interval of oil in 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval