MAINTENANCE MAINTENANCE PROCEDURE Rubber Shoes or Road Liners - Check (Mechine equipped with rubber shoes, road liner) If the rubber shoes or road liner are in the following condition, they must be repaired or replaced, so please contact your Komatsu distributor for repairs or replacement. Lug Height If lug hieght "a" is reduced by wear, the drawber pull will drop. (Rubber shoes) If "a" is less than 5 mm (0.2 in), replace with a new part. If the lug is worn and the steel cord inside the shoe is exposed for two or more links, replace with a new part. (Rubber shoe specification) Rubber Shoe Steel Code Cuts If more than half of the steel cord layer on one side is cut, replace with a new part.
4-29