MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS Stop Valve This valve (1) stops the flow of the hydraulic oil. (a)FREE : Hydraulic oil flows. (b)LOCK : Hydraulic oil stops. When removing or installing attachments, set this valve to the LOCK position. Selector Valve This valve(2) selector the flow of the hydraulic oil. Position (a) : When breaker is used Position (b) : When general attachment is used (crusher, etc.) Attachment Control Pedal This pedal (3) is used to operate the attachment. (a) Pedal for one line attachment (b) Pedal for two line attachment(If equipped) The breaker is operated with right pedal (1) . Lock Pin This pin(4) is used to lock the control pedal. Position (a) :
LOCK Position (b) : FREE (when carrying out work with large oil flow) Position (c) : FREE (when carrying out work with small oil flow) Always keep the pedal locked except when operating the attachments. 6-18