Komatsu — MAJOR COMPONENT DESCRIPTION

OM5026 Specifications - Section 5 Page 5-1 MAJOR COMPONENT DESCRIPTION The KOMATSU Model 730E Dump Truck is an electric drive, off-highway, rear dump truck whose gross vehicle weight is 715,000 lbs. (324 324 kg) rated for a maximum payload of 210 tons (190 t). ENGINE The KOMATSU 730E Dump Truck is powered by a Komatsu SSA16V159 engine rated at 2000HP (1492 kW). POWER STEERING The KOMATSU 730E Dump Truck is equipped with a full time power steering system which provides positive steering control with a minimum of effort by the opera- tor.

The system includes nitrogen-charged accumula- tors which automatically provide emergency power if the steering hydraulic pressure is reduced below an established minimum. ALTERNATOR (GE GTA-22) The diesel engine drives an alternator mounted in-line with the engine. The alternating current (AC) output of the alternator is rectified to direct current (DC) and sent to the DC drive wheel motors. WHEEL MOTORS (GE 788) DYNAMIC RETARDING The output of the alternator supplies electrical energy to the two wheel motors attached to the rear axle housing. The two wheel motors convert electrical en- ergy back to mechanical energy through built-in gear trains within the wheel motor assembly.

The direction of the wheel motors is controlled by a forward or reverse hand selector switch located on a console to the right side of the operator. The dynamic retarding is used to slow the truck during normal operation or control speed coming down a grade. The dynamic retarding ability of the DC electric system is controlled by the operator through the acti- vation of the retarder pedal in the operators cab and by setting the RSC (Retarder Speed Control). Dynamic Retarding is automatically activated if truck goes to a preset overspeed setting.

BLOWER BRAKE SYSTEM The blower supplies cooling air for the rectifiers, AC alternator, and to both wheel motors, where it is then exhausted to atmosphere. The wheel service brakes are caliper/dry disc brakes applied by an all hydraulic actuation system. Depress- ing the brake pedal actuates wheel-speed single disc front brakes and armature-speed dual disc rear brakes. The rear brakes can also be activated by operating a switch on the instrument panel. OPERATOR’S CAB The Operator’s Cab for the KOMATSU 730E Dump Truck has been engineered for operator comfort and to allow for efficient and safe operation of the truck.

All wheel brakes will be applied automatically if system pressure decreases below a preset minimum. The cab provides for wide visibility, with an integral 4-post ROPS/FOPS stucture, and an advanced analog operator envirnment. It includes a tinted safety-glass windshield and power-operated side windows, a de- luxe interior with a fully adjustable seat with lumbar support, a fully adjustable/tilt steering wheel, controls mounted within easy reach of the operator, and an analog instrument panel which provides the operator with all instruments and gauges which are necessary to control and/or monitor the truck’s operating sys- tems.

The parking brake is a caliper/disc type, mounted on each rear wheel motor, and is spring-applied and hy- draulically-released with wheel speed application pro- tection (will not apply with truck moving). SUSPENSION HYDRAIR ® II suspension cylinders located at each wheel provide a smooth and comfortable ride for the operator and dampens shock loads to the chassis during loading and operation.