Komatsu — CENTER CONSOLE

Operation - Section 3 OM3030.2 Page 3-18 Operator Cab and Controls WINDSHIELD WIPERS The windshield wipers (17, Figure 3-1) are pow- ered by an electric motor. Refer to INSTRUMENT PANEL AND INDICATOR LIGHTS, for a location and description of the windshield wiper and washer controls. CENTER CONSOLE The Center Console (1, Figure 3-4) contains: (1) Center Console (2) F-N-R Selector Switch (3) Hoist Control Lever (4) Ash Tray (5) Cigar/Cigarette Lighter (6) L.H. Window Control Switch (7) R.H. Window Control Switch (8) Engine Shutdown Switch (9) Override Switch (10) BLANK - NOT USED on this truck (11) RSC "Off/On" Switch (12) Retarder Speed Control Dial (13) Cummins A.E.M.

Diagnostic Port (14) Cummins Centry Diagnostic Port (15) G.E. Statex III Download Port (16) Passenger Seat (mounted on top of the right hand portion of the Console structure) FIGURE 3-4. CENTER CONSOLE F-N-R SELECTOR SWITCH The Selector Switch (2, Figure 3-4) is mounted on a console to the right of the operator’s seat. It is a three position switch which controls the Forward-Neutral- Reverse motion of the truck. When the Selector Switch handle is in the center " N " position, it is in "Neutral". The handle must be in Neutral to start the engine. The operator can select Forward drive by moving the handle forward. Reverse drive can be selected by moving the handle to the rear.

The truck should be stopped before the selector handle is moved to a drive position.