Operation - Section 3 OM3030.2 Page 3-22 Operator Cab and Controls OPERATOR SEAT The operator’s seat provides a fully adjustable cush- ioned ride for the driver’s comfort and ease of opera- tion. Adjustment The following adjustments must be made while sitting in the seat. 1. Headrest : Move headrest (1, Figure 3-5) up, down, fore, or aft, to desired position. 2. Armrests : Rotate adjusting knob at front of armrest (either side) until armrest (2) is in desired position. 3. Lumbar Support : Turn adjustment knob (3) for desired lumbar sup- port. 4. Seat Belt : Make all other seat adjustments first. Then fasten seatbelt to other side (not shown) and adjust to a firm, but comfortable, restraint.
! Seat belt should always be fastened when operating Truck! 5. Backrest : Pull control (5) upward and hold, select the most comfortable backrest angle; release control. FIGURE 3-5. OPERATOR’S SEAT 6. Suspension Adjustment : For best performance, rotate handwheel (6) until your body weight (pounds) is shown on indicator. 1. Headrest 2. Armrest Adjustment 3. Lumbar SupportAdjustment 4. Seat Belt 5. Backrest Angle Adjustment 6. Seat Suspension Adjustment 7. Fore and Aft Adjustment 8. Height and Slope Adjustment 7. Fore/Aft Location of Seat : Lift adjustment lever (7) up and hold. Move seat Fore/Aft to desired position; release lever. 8. Height and Slope Adjustment of Seat Cushion : Height :
Lift up on control lever (8) and hold; raise or lower seat to desired position, release lever. Seat Cushion Slope : Push down on control lever (8) and hold; tilt seat to desired position, release lever.