Komatsu — PANEL GAUGES, INDICATORS AND CONTROLS

Operation - Section 3 OM3030.3 Page 3-24 Instrument Panel & Indicator Lights FIGURE 3-6. PANEL GAUGES, INDICATORS, AND CONTROLS 1. Keyswitch 15. Right Turn Signal Indicator Light 2. Engine Shutdown Switch with Timer Delay ( Optional ) 16. High Beam Headlight Indicator Light 3. Backup Light Switch (N./O.) 17. Left Turn Signal Indicator Light 4. Ladder Light Switch 18. Digital Speedometer 5. Fog Light Switch (N./O.) ( Optional ) 19. Voltmeter Gauge 6. Panel Illumination Light(s) 20. Engine Oil Pressure Gauge 7. Vent(s) - Cab Air Conditioner/Heater 21. Engine Water Temperature Gauge 8. Engine Starting Aid Switch (N./O.) ( Optional ) 22. Fuel Gauge 9.

Rotating Beacon Light Switch (N./O.) ( Optional ) 23. Blank(s) - Reserved For Future Options 10. Heated Mirror Switch (N./O.) ( Optional ) 24. Engine Hourmeter 11. Leakage Test Switch ( Trolley Option ) 25. Blank - Not Used In This Application 12. Wheel Brake Lock Switch (N./O.) 26. Headlights Switch (N./O.) 13. Parking Brake Switch (N./O.) 27. Wiper / Washer Switch 14. Digital Tachometer 28. Panel Illumination Lights Dimmer Rheostat PANEL GAUGES, INDICATORS, AND CONTROLS (Figure 3-6) (1, Figure 3-6) KEY SWITCH The key switch is a 3-position (Off, Run, Start) switch.

When switch is rotated one position clockwise, it is in the "Run" position and all electrical circuits (except "Start") are activated. With Selector Switch in " N eutral", rotate keyswitch fully clockwise to "Start" position and hold this position until engine starts. "Start" position is spring loaded to return to "Run" when key is released. With truck stopped, turn keyswitch counterclockwise to "Off" for normal engine shutdown. Use Engine Shutdown switch on center console, if engine does not shutdown with keyswitch. NOTE: A ground level shutdown switch is located on lower front left side of truck.