Komatsu — 12.14.4 POSITION INDICATOR

OPERATION 12.14.3 AUXILIARY OPERATION (LEVER) The multi-purpose bucket control lever (2) located to the right of the bucket/lift arm control (1) control the opening and closing of the clam on the bucket OPEN (A) Push the control lever forward to open the bucket clam. When released, the lever will automatically return to the “HOLD” position. HOLD (B) The control lever will return automatically to the “HOLD” position from either the “OPEN” or “CLOSE” position when released. The bucket clam will remain in the same position it was in when the control lever was released. CLOSE (C) Pull the control lever back to close the bucket clam.

When released, the lever will automatically return to the “HOLD” position. 12.14.4 POSITION INDICATOR When the machine is equipped with a multi-purpose bucket, the bucket is equipped with a clam position indicator. The indicator is located in the upper left side of the bucket, and indicates to what extent the clam is opened or closed. Raise the bucket a few feet off the ground whenever changing the clam setting. (0) indicates fully closed (1) indicates 1/4 open (2) indicates 1/2 open (3) indicates 3/4 open (4) indicates fully open 2-55