Komatsu — 12.25.2 TIRE PRESSURE

OPERATION If the deflection of the tire is excessive, raise the inflation pressure within the limits given in this table to give a suitable deflection (see deflection ratio). Stockpile operations means the loading of sand and other loose materials. PRECAUTION WITH LOAD AND CARRY METHOD When traveling continuously with load and carry operations, choose the correct tires to match the operating conditions, or choose the operating conditions to match the tires. If this is not done, the tires could be damaged, so contact your distributor or tire dealer when selecting tires. NOTE:

The pressure guidelines are based on the weitht of a ready to work machine, at rated payload and operating under average conditions. If additional attachments are installed, or the machine operates under unusual conditions, consult your tire supplier for recommended inflation procedure. COMPENSATING FOR TEMPERATURE CHANGES If the tire is inflated in a warm shop (21 E C. / 70 E F.), and the machine operates outside in freezing conditions, the tires will be under inflated. Low pressure reduces tire life. Consult your tire supplier for cold weather recommendations.

2-82 Tire size (pattern) Ply rating Inflation pressure (kg/cm²) Soft ground (sandy ground) Normal road When shipped from factory Stockpile Digging 17.5 - 25 (L2 Traction) 12 1.8 - 3.2 1.8 - 3.5 2.0 - 3.5 Front tire: 3.0 Rear tire: 3.0 17.5 - 25 (3 Rock) 12 1.8 - 3.2 1.8 - 3.5 2.0 - 3.5 20.5 - 25 (L2 Traction) 12 1.9 - 3.3 1.9 - 3.3 2.1 - 3.5 Front tire: 2.8 Rear tire: 2.8 20.5 - 25 (L3 Rock) 12 1.9 - 3.3 1.9 - 3.3 2.1 - 3.5