Komatsu — 24.7.3 LUBRICATE

MAINTENANCE 24.7.3 LUBRICATE WARNING ! Set the work equipment in a stable condition, then turn OFF the machine and apply the lock for the work equipment control levers. ! Apply the parking brake, and lock the front and rear frames with the safety bar and pin. ! Use a grease pump to pump in grease through the grease fittings marked by the arrows. ! After greasing wipe off any old grease that was pushed out. Center drive shaft spline (1 place) REMARKS Carry out the same procedure also for machines equipped with the auto greasing system. 3-55