Komatsu — 24.8.3 LUBRICATE

MAINTENANCE 24.8.3 LUBRICATE WARNING ! Set the work equipment in a stable condition, then turn OFF the machine and apply the lock for the work equipment control levers. ! Apply the parking brake, and lock the front and rear frames with the safety bar and pin. ! Use a grease pump to pump in grease through the grease fittings marked by the arrows. ! After greasing wipe off any old grease that was pushed out. 1 Center hinge pin ( 2 Places) 2 Front drive shaft(2 places) 3 Drive shaft center support (1 place) 4 Center drive shaft (2 places) 3-58