OPERATION 10. REAR WIPER SWITCH (equipped with cab) Turn lever (C) to operate the rear wiper. 11. CIGARETTE LIGHTER (equipped with cab) This is used to light cigarettes. To use, push the lighter in. After a few seconds it will spring back. At that time remove the lighter and light your cigarette. 12. ATTACHMENT SWITCH (bucket / fork selection) Located on the control lever console, the switch activates the appropriate bucket/fork positioner proximity switch. When using a bucket select the bucket position on the attachment switch. When using a fork select the fork position on the attachment switch. 13.
DUMP SPEED SWITCH Located on the control lever console, the two position switch allows the operator to select a slow or fast tilt cylinder dump speed. A significant increase in the dump speed occurs when the fast speed is selected. The tilt back speed is not affected by this switch. 14. QUICK COUPLER ATTACHMENT SWITCH Located on the control lever console, the momentary contact switch activates the coupler plungers to couple and uncouple attachments. Pushing the switch to the unlock position disengages the coupler plungers from the attachment. Releasing the switch extends the plungers and engages the coupler plungers to the attachment.
Refer to coupling and uncoupling procedure in this section. 2-18